SKP Bearing has diversified its product line in the manufacturing of steel Balls. The ball unit was incepted in 2018 and since then has been fully functional in the manufacturing of bearing-grade steel balls. The units have machines of makes National, Geiss, SKF-Sweden, etc., with in-house heat treatment facilities to manufacture G5 and G10 grade balls, ranging from 5/32" to 7/8" in size.
Steel Ball
About Steel Ball
Why choose us as your Steel Ball ?
In today's scenario, quality is at its most important, and thus SKP ball unit has inspection and control at every stage of the process. On and above, a standard room for checking the parameters has been installed, which has instruments like,
- Metallurgical Microscope with Image Analyser
- Mould Making Stations
- Ball Scanning Equipment (Aviko)
- Waviness Tester
- Crushing Load Tester
- Roundness Tester
- Roughness Tester
- Microscope
- Hardness Tester
- Digital Micrometre
- Gauge Checking Instruments with Range of 0.1µm
| BALL RANGE | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Size(Inch) | Size(mm) | Size(Inch) | Size(mm) | Size(Inch) | Size(mm) | Size(Inch) | Size(mm) | |||
| 5/32" | 3.968 | -- | -- | -- | -- | -- | -- | |||
| 7/32” | 5.556 | 3/8” | 9.525 | 17/32” | 13.494 | 23/32” | 18.256 | |||
| 15/64” | 5.953 | -- | 10 | -- | 14 | 3/4" | 19.05 | |||
| -- | 6 | 13/32” | 10.319 | 9/16” | 14.288 | 25/32” | 19.844 | |||
| 1/4" | 6.35 | 7/16” | 11.113 | -- | 15 | 13/16” | 20.638 | |||
| 17/64” | 6.747 | 29/64” | 11.509 | 19/32” | 15.081 | 27/32” | 21.431 | |||
| 9/32” | 7.144 | 15/32” | 11.906 | 5/8” | 15.875 | -- | 22 | |||
| 5/16” | 7.938 | -- | 12 | 21/32” | 16.669 | 7/8” | 22.225 | |||
| -- | 8 | 31/64” | 12.303 | 11/16” | 17.463 | |||||
| 11/32” | 8.731 | 1/2" | 12.7 | -- | 18 | |||||
Product Gallery
